GO Elevation HV

GO Elevation HV

SKU: GO-ELEHV-5N / GO-ELEHV-10NCategory: Linear Stages

The elevation stage in the 45-series, available in both standard and High Vacuum versions, features a flat top and offers a footprint of 45×45 mm, a travel range of 10 mm vertically and is available with 5 N or 10 N operating lift force. The PRECIBEO GO Elevation Stage HV is built for high vacuum environments down to 10-4 Pa. Each stage is fitted with a vacuum side cable (PTFE coated wires in a braided metal sleeve) ended with a female D9SUB connector. Each stage also comes with an air side female D9SUB to ix-Industrial cable. Connect the vacuum side and air side cables to your D9SUB feedthrough, the air side ix-connector to the GO Controller, and you are ready to GO!​

All products in the modular PRECIBEO GO system are compatible and are easily combined into multi-axis systems offering Smooth Continuous Motion, Fast Step & Settling Times and that are Self-Locking at Rest.

PositioningGO-ELEHV-5NGO-ELEHV-10N
Travel (Z)+10 mm
Position SensorOptical Encoder
Sensor Resolution2 nm
Minimum Incremental Motion2 nm
Bidirectional Repeatability+- 100nm (typ. @ full travel)
Straightness & Flatness+- 2 µm (typ.)
Pitch+- 150 µrad (typ.)
Yaw+- 150 µrad (typ.)
MotionGO-ELEHV-5NGO-ELEHV-10N
Maximum Operating Force (Push/Pull)5 N (min.)10 N (min.)
Holding Force (When Power Is Off)6 N (min.)11 N (min.)
Maximum Speed (At No Load)8 mm/s
Maximum Speed (At Maximum Operating Force)5 mm/s (min.)1 mm/s (min.)
Drive TypeGO-ELEHV-5NGO-ELEHV-10N
Motor TypePiezo Drive
MechanicalGO-ELEHV-5NGO-ELEHV-10N
Maximum Load0,5 kg1 kg
Guide TypeCrossed Roller
Size45x45x38 mm
Weight (without cable & connector)160 g (+-10%)
MiscellaneousGO-ELEHV-5NGO-ELEHV-10N
Vacuum Side Cable0,5 m cable (+-5%) with f. D9SUB connector
Air Side Cable2 m cable (+-5%) with f. D9SUB & ix Industrial™ connectors
MaterialAluminum